User Tools

Site Tools


hpl3:tools:maineditors:level_editor:terrain_editmode:undergrowth_mode

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
hpl3:tools:maineditors:level_editor:terrain_editmode:undergrowth_mode [2012/11/04 17:00]
luis [Undergrowth Material editor]
hpl3:tools:maineditors:level_editor:terrain_editmode:undergrowth_mode [2012/11/05 12:29] (current)
luis
Line 22: Line 22:
  
 ==== Main ==== ==== Main ====
-  * **Base Mesh**: mesh that will be used as single plant to place.+  * **Base Mesh**: mesh that will be used as single plant to place. Should be 1x1x1 sized.
   * **Max Density**: the higher the number, the more plants will be created per square unit.   * **Max Density**: the higher the number, the more plants will be created per square unit.
   * **Align to slope amount**:   * **Align to slope amount**:
Line 37: Line 37:
  
 ==== Wind ==== ==== Wind ====
-  * **Wind active**: +  * **Wind active**: ​toggles wind blowing effect for the material. 
-  * **Wind frequency**:​ +  ​* The rest of the inputs control the sway effect for the plants. 
-  * **Wind amplitude**:​ +    ​* **Wind frequency**:​ 
-  * **Wind speed**: +    * **Wind amplitude**: ​the higher this value gets, the wider the sway movement will be. 
-  * **Wind octave muls**:+    * **Wind speed**: 
 +    * **Wind octave muls**:
  
 ==== ForceField ==== ==== ForceField ====
-  * **Max force**: +  ​* These inputs control the sway effect induced on the plants by a present ForceField. 
-  * **Force mul**: +    ​* **Max force**: ​sets the maximum force that will be applied by an affecting ForceField. 
-  * **Frequency mul**: +    * **Force mul**: ​force applied will be multiplied by this factor. 
- +    * **Frequency mul**: ​frequency for the affecting ForceField will be multiplied by this factor.
hpl3/tools/maineditors/level_editor/terrain_editmode/undergrowth_mode.txt · Last modified: 2012/11/05 12:29 by luis